Have you ever experienced a time when the water pressure in your home suddenly dropped? It’s not the most pleasant thing to go through. It can be frustrating taking a shower and then the water just doesn’t have enough pressure. The best solution to this kind of problem is to call a plumber. A professional can make quick work of any plumbing repairs and water pressure could be restored quickly. Of course, there are other ways on how to deal with the problem without calling the pros. However, be prepared to go through some trial and error.
Here’s what you need to do in order to fix plumbing issues:
Testing the water pressure
It is important that you don’t panic when the water pressure drops. These kinds of plumbing issues can be resolved rather quickly in most cases. Keep calm and investigate. Here are some of the things that you should do:
- Don’t use the water in the household while you perform an inspection. Close all faucets and etc.
- Make sure that the shutoff valves are fully open.
- Connect a pressure gauge to a water spigot to perform the initial check.
- Turn the water on and record the results. Pressure levels ranging from 45 to 60 PSI are normal. Anything lower than 40 PSI is considered low pressure. If results remain negative, call a North Myrtle Beach plumber.
How to boost the water pressure in your shower
If your shower is problematic, you might want to try out a bunch of stuff before you decide to replace your showerhead. Here’s what you can do to alleviate the low water pressure in your showerhead:
- Soak your shower’s aerator in vinegar or some other cleaning agents.
- Check the water flow restrictor and remove it. Then run water through and see the results.
- If all else fails, replace your showerhead with one that is rated for high-pressure.
- Consider installing a pressure booster.
- Call local residential plumbing for repairs.
Adjusting the pressure reducing valve
If you’ve finally ruled out that clogged pipes aren’t the issue, you may proceed with checking the PRV or pressure-reducing valve. This is the fastest way to check if the water pressure simply dropped due to a tight valve. The PRV is usually located near the water meter. If loosening the PRV still doesn’t return the water pressure to normal, you should contact NMB Plumbing Pros. Expert plumbing services are your best bet in resolving the problem quickly.
Call a professional plumber
For all your plumbing concerns, you should call a professional plumber. Although there is always the option of DIYing all of your plumbing problems, it is best to call in an expert plumber to deal with the problem. In tight situations, you can rely on an emergency plumber to deal with the problems at hand.
Are you looking for a reliable plumber that can provide the results you need? Call NMB Plumbing Pros. You may reach us at (843) 353-6409.
NMB Plumbing Pros
North Myrtle Beach, SC 29582